Smart Telescope Performance Dashboard
1. Mean FWHM (px) ± SD per Telescope
View Mean: 3.59 px
Sensor Pixels (px)
1. Mean FWHM (px) ± SD per Telescope
2. Mean Eccentricity ± SD per Telescope
View Mean: 0.49
Roundness (0 = Circle)
2. Mean Eccentricity ± SD per Telescope
3. Mean Standardized FWHM (“) ± SD per Telescope
View Mean: 10.61″
Arcseconds (“)
3. Mean Standardized FWHM (“) ± SD per Telescope
4. Full Telemetry Dataset (Raw Session Logs)
63 sessionsStats Guide & Telemetry Definitions
1. Reading the Forest Plots & View Tabs
Average per Telescope Tab (Default): Aggregates all matching sessions for each telescope, plotting the Mean across sessions (sorted sharpest to widest) with whiskers showing ±1 Standard Deviation (SD) between sessions.
All Captures Tab: Each dot shows a single session’s median, the horizontal whisker spans [Median − MAD, Median + MAD] across the frame (MAD = Median Absolute Deviation), and the dashed line shows the overall median for your active filter view.
FWHM (Full Width at Half Maximum) — Star Sharpness: Measures a star’s diameter at 50% of its peak brightness in arcseconds (allowing fair comparison across different focal lengths and pixel sizes). Lower is sharper: < 2.5″ = razor-sharp optics & steady seeing; 2.5″–4.0″ = typical smart-telescope performance; > 4.5″ = soft focus, turbulent seeing, or tracking blur.
MAD FWHM — Field Flatness: Measures how consistent star sharpness stays from the center of the frame to the corners.
2. Median & MAD Eccentricity — Star Roundness
Eccentricity: Measures how round or oval stars appear on a non-linear scale from 0.00 to 1.00. Lower is rounder: 0.00 = perfect circle (0% elongated); ≤ 0.42 = visually round (≤ 10% elongated); 0.42–0.50 = practical keeper range (≤ 15% elongated); > 0.55 = noticeably oval from off-axis field curvature, tilt, or alt-az tracking drift; 1.00 = flat star trail. (Note: Longer sub-exposures and tighter, sharper stars with lower FWHM can show slightly higher eccentricity because smaller star cores and longer integrations expose tiny alt-az tracking nudges that softer stars blur over.)
MAD Eccentricity: Shows how consistent star roundness remains from frame center to edges—low MAD indicates uniform roundness across the entire sensor, while high MAD flags corner elongation.
3. Standardized FWHM (arcseconds) — Cross-Scope Resolution
Because smart telescopes have different focal lengths and pixel sizes (from 1.65″/px on the Vespera Pro and 1.66″/px on the Vaonis Atlas to 3.99″/px on the Dwarf Mini & S30), pixel FWHM cannot be compared directly across rigs.
Standardized FWHM (SFWHM) = Median FWHM (px) × Image Scale (“/px) converts star size into true angular sky resolution in arcseconds (“).
4. Personal Urban (Bortle 7) vs. Company Data
Personal Urban (Bortle 7): All Seestar, Dwarflab (Dwarf3, Dwarf Mini), and Vaonis Vespera-series sessions were captured personally from an urban balcony under Bortle 7 skies.
Company Data: Vaonis Atlas (combining Atlas and Atlas Twin) and Dwarflab Draco sessions are manufacturer-provided reference captures from darker skies (Bortle 4–5) or guided setups.